Smarty Cresta

i envy the u.s guys,they easily can buy car that they like directly from japan,without the hassle of a.p shit and all....btw here is Alex's a.k.a Doriftokido jzx81 cresta...(something to inspire our friend in Brunei hehe)


i know i remember this Cresta from a pic somewhere...the stock painted 1j intercooler confirms it!

owh.....the rear look so tough yet so nice....

from,
http://jzxproject.com/bbs/index.php?showtopic=3600

Black Gaban!

i have a quick dinner with Gaban and his family just now,and as u can see the Z mobile is full black,no more two tone black & red..waiting for the new decal from his sponsor...heard that Burn's also changing to black...eh wait,Burn is already dark what....no...not that,i meant his lancer hahahaha

the usual stuff..

back to routine,went to check out chop shop for use able part for jyu, this time with Mahfuz, Lan and Eddy G scouting at Selayang Area..

Lan helping himself finding hidden treasure at the chop shop

mini cooper anyone??

next we went to the famous Engineering shop in Klang Valley,"Darren Wah Seng"....hahahaha someone mistaken Darren Wanshen name instead..its Wah Seng Auto Engineering.. i heard about this place a long time already but this is the first time i been there to pick up Mahfuz lancer 174 axle..it need to be modded to install it on his KE70 Sr N/A..

Hunting session is almost over..

got my halfcut already,as it arrived at the workshop yesterday..it took some time unloading due the workshop is currently packed with customer car..

unloading time..

engine bay, mileage of 113km

dashboard still in good condition,long shaft,big carpet and sr20 stock intercooler??wtf!

R154 gearbox and the mechanic confirms it..with stock clutch

clutch pump with custom made heat shield..also noticed something weird about the brake paddle,easy to heel and toe maybe??

finally here a short video of the engine idling and revving with rm5 of petrol,the engine sure drinks a lot fuel.. and i do meant a lot hahahaha...


was quite worried when the compressor was not working,after a quick check, the gas has ran out..fuh...honestly,im dead broke now hahahaha
next i need to find a proper intercooler and IRS subframe..

eventually i have to wait for the workshop to clear its major job first before i can send my car there,and as for the 1jz engine will be dismantle from the chassis...hope this wont take so long... coz i cant wait!!

The 6 Bangers of J..

My runner said he will confirm tonight about wether he can send or not the halfcut to workshop tomorrow..if he said cannot then have to wait a few more days...and i might have to take another day off...again??hmm

first look of My MarkER new heart

Digital Countdown..

as the time pass by each day,there's a mix feeling..

"uncertain,happy,affraid,excited,worried,"

well the choice is made..

the replacement heart is coming.....

one thing for sure im not putting any high expectations...

for now i will keep on praying and hoping for the best,

the rest we'll just have to wait and see..huhu!!~

Back to School..

i supposed to register for my Japanese language class tonight at 8p.m..got back from work around 5.30p.m..damn tired..decided to take a quick nap only to wake up at 8.45 p.m!!(funny..i already set the alarm but i didnt hear it hehe)
rushed like hell to the language faculty and wondering around like an idiot trying to find where in the world is my classroom..thankfully one nice fella gave me the lecturer contact number...and his friend gave me the direction,which is at level 13,the new engineering faculty(thanks again)...finally i got there and the class have only started for like 20 minute....fuhh!

why Japanese u ask?
its something i like and always wanted to learn..last time when i did my study,its mandatory to learn mandarin & french only in the course that i take(since i dont prefer it, i only learn to passed..now i cant even remember a single thing..errr hahaha)..having an advantage of the campus so near from the place im staying just make things easier...plus its only twice a week 8-10pm..

its also feel weird coming back to this place,and becoming a student again,even for a short course...well its not too old or too late to learn right hehe

offtopic btw i accidently entered a korean classroom...what got me thinking maybe i should change korean language instead becoz the lecturer is a beautiful korean female(yaaa like the one u see in korean drama)...that surely will speed up learning process hahahahha....

at the tire shop..

saturday..,have the time to change the tire that i bought from my uncle..

floating

after using 225/45/17 i can see the 1 inch gap between the fender and tire...no good hehe...plus jyu is super dirty...huhu

Cressida in a Cage!

i always like reading ultimate build up,hats off to the guys who do it theyself in their home garage... this a project by "Loose Seal" from Jzxproject..his previous built up was a Silvia S13,but not as extreme as this Cress...honestly i learned alot from the Jzxproject about x8 series model...they reply on the forum maybe harsh but seriously these guys are knowledge able hehe....

the true defination of DIY!

its all about the detail bro....

single turboo

typical nissan 4port on a Toy ota...

monster almost ready for an action!

read the rest of his project here:

http://jzxproject.com/bbs/index.php?showtopic=2234

You 90 v8 BaboonAss!

First of all,dont get me wrong,im not mad or something... Pedey a.k.a Peter Kelly nickname in cyberworld is Baboonass..here's the ultimate spec

JZX-90 MARK II
ENGINE:
1UZ-FE LEXUS 4 LITRE ALLOY V8FORCED
INDUCTION:TURBONETICS T-76 TURBOCHARGER
TIAL 50MM EXTERNAL WASTEGATED
SR FRONT MOUNTED INTERCOOLER

FUELLING:
CUSTOM SURGE TANKX3 BOSCH RACING FUEL PUMP
S750CC INJECTORS

MANAGEMENT:
LINK G3

HANDLING:
HKS HIPERMAX DRIFT COIL-OVERSALL ARMS AFTERMARKET ADJUSTABLE
CUSTOM TIE ROD ENDS

EXTERIOR:
VERTEX KIT
PUMPED GUARDS

INTERIOR:
8-POINT HOMOLOGATED ROLL CAGE
RACEPAK ULTRA DASH EXTREME DIGITAL DASH
HKS BOOST GAUGERACEPRO SEATS
5-POINT HARNESSES
DESTROY COMPOSITES CARBON INTERIOR PANELS

PERFORMANCE:
CERTIFIED, STREET LEGAL 400HP AT THE WHEELS ON 8 PSI


cruising

love the meter dash

V8 powah!!

Abacus??

The car seems familiar right??this is becoz its was featured in speedhunters some time ago,

http://speedhunters.com/archive/2009/02/06/car-feature-gt-gt-nz-jzx-90-toyota-mark-ii.aspx

follow pedey blog at:

http://www.pedeyworld.com/

Cleanliness is the key of sanity

super clean and tidy,a 3years restoration project by a Jzxproject.com member...i want hehe

The New Identity?

Just picture and the biggest gamble ever....

hope everything going as planned...

i lost count...ha ha

the continues journey of 1jz hunting...i got a call last week from Din a.k.a Conflict Tuning,saying that his friend saw a Jzx81 manual halfcut at Bentong, Pahang...and so saturday morning were off there to Bentong to check the Bentong Halfcut scene!!...we??

Yeah,im joined by Amat and Nick this time,thank guys!

upon arrival,we found the Jzx81 halfcut alright,but it was Auto..the manual was from Jzx90...

target found!

clean and well kept engine...

minus point-crack grey colour dashboard,non-digital meter,no carpet and the milleage is 140k(compare to the white halfcut 96k)...

here is the plus, it came with IRS!(seller dont want to sell it separately....)

the seller is also friendly..He offer the price of rm4k for whole halfcut,long shaft, subframe,internal fuel pump and delivery to klang valley...


at Bentong i spotted a Crown and in the making Cresta...

anyway....i still haven't make up my mind....

el-cheapo tire

bought 6pcs of Pirelli tire from my uncle last week,he selling at rm70 per piece...

spec
225/45/17 Pirelli
Year 06 - 07
80-90 percent

still in good condition,as the previous owner change to 18inch....finally i can get rid of the 235/45/17 on the super advan and slammed the car back one inch hehe

ooo is that so.....part 2

last monday, i took a day off,to go and buy that jzx81 auto halfcut,the plan was to go and booked it first,saturday pay in full and sent it to the workshop then shit happen,the price for the halfcut as discuss before with the chopshop seller was rm3.5k...i said okay la even without Subframe/IRS,considering with the nice condition and long shaft given...what i didnt know,i have to add another rm300 for the bodyparts....WTF!!if u wanted to sell it with out bodypart stripped it first la so i know or just mention the total price rm3.8k....rm300 maybe reasonable compare i buy it seperately but i just felt cheated that way...the previous jzx81 auto halfcut that i didnt get to buy goes for only rm3k along with the bodypart,long shaft and even subframe...thats a different shop and different story but this is just pissed me off!! (yeah, im cheap, i know) with the "langsi" attitude of the seller making it even worse...i got fed up and leave that placed....

what a waste of my off day....i should have gone to work on monday!!..so back to hunting again,hoping to find a better halfcut with a nice price....maybe everything happen for a reason....haih....

as im typing this entry,there's a warning sign keep pop-ing out on my notebook saying "your trial version of windows vista 7 ultimate will expired in 14 hours"........great!!!!!im on outstation right now,only return back on friday.....just great!!!! fuck..hahahahaha..end............